Dalsa TS 2560 Camera

The Dalsa Genie TS-M2560 brings new levels of performance with its high frame rate and increased onboard memory.

Using an Anafocus Lince 5M monochrome CMOS sensor with a resolution of 2560 x 2048, the Dalsa Genie TS 2560 camera's "Fast Mode" allows for image capture rates of 51 fps in 5 megapixel resolution with a true global shutter while maintaining high image quality..

The Genie TS-M2560 takes advantage of gigabit Ethernet technology, transmitting data over standard CAT-5e and CAT-6 cables to distances of up to 100 m. Like all Genie cameras, the TS-M2560 is based on AIA (Automated Imaging Association) GigE Vision Standard to directly link the camera to a PC.

FEATURES:

• Uses standard PC Ethernet port & hardware
• Supports cable lengths up to 100 m (CAT-5e or CAT-6)
• Simplified set-up with field proven Sapera Essential software featuring CamExpert
• Engineered to accommodate industrial environment with a Ruggedize, screw mount, RJ-45 connector
• Auto-Iris (Video, DC or Motorized)

PROGRAMMABILITY:

• Higher frame rates achievable in partial scan mode
• Global electronic shutter with exposure Control
• Multi-Exposure Feature
• Programmable LUTs
• On-board Image compression
• Transfer On-Demand Function
• IEEE1588 Precise time Protocol

TYPICAL APPLICATIONS:

• Electronics manufacturing inspection
• Industrial metrology
• Intelligent traffic systems

TECHNICAL INFORMATION:

• Active Resolution: 2560 x 2048
• Frame Rate: 51 fps
• Data Output Transfer: Gigabit Ethernet, also supports 100 Mbps
• Pixel Size: 5 µm
• Data Format: 8-bits
• Exposure Control: Automatic, Programmable, or via External Trigger
• Dynamic Range: 52 dB
• Gain Control: Automatic, Manual
• Image Buffer 512MB of On-board memory
• Lens Mount: CS-MOUNT
• Size: 49 mm x 49 mm x 54 mm
• Mass: ~196 g
• Operating Temp: -20 to +60c
• Power Supply: 12 to 24V or Power Over Ethernet (POE)
• ower Dissipation: ~4.5 to 5.5W
• Data Connector: Standard or Screw mount RJ-45
• Power and I/O: Micro-D 25-pin and 4-pin auto-Iris
• Regulatory Compliance: FCC Class A, CE, RoHs 2004/105/EC
• Camera Specification: GigE Vision v1.2 Compliant
• Software Platform: Teledyne DALSA Sapera LT or 3rd Party Genicam Compliant SDK

Request a Quote